New Kitchen Cabinets
Installed, by the linear foot: stock runs $100–$285, semi-custom $190–$615, and custom $475–$1,140. A typical 20-foot semi-custom kitchen in maple lands around $3,800–$12,300 before counters. Angi's national average for a full cabinet job is $6,191, with most projects between $1,935 and $10,769 — a Sioux Falls kitchen built to order usually sits in that same band. Countertops are priced separately.
Cabinet Refacing
New doors and drawer fronts plus a new skin on your existing boxes: $120–$350 a linear foot for a typical mix, with laminate at $40–$100 and solid wood doors at $160–$390. Refacing only works when the boxes are sound and the layout stays — when it fits, it lands at roughly half the cost of new cabinets and takes days, not weeks.
Cabinet Installation Only
You supply the cabinets, we hang them level and true: $45–$110 a foot for stock, $70–$135 for semi-custom, $180–$270 for custom work that needs scribing and fitting. Removing and hauling off the old cabinets adds $15–$20 a foot when you want it on the same ticket.
Bathroom Vanity Cabinets
A prefab vanity installed runs about $140–$360 a foot of width; a custom vanity built to the room runs $280–$750 a foot. Most single vanities land between $500 and $2,000 installed — small jobs carry minimums because the trip, the setup, and the hookup are the same either way.
Cabinet Painting & Refinishing
Sprayed paint on sound cabinets: doors $65–$110 each, drawer fronts $30–$100, and the boxes and frames $25–$36 a foot. A typical 20-door kitchen lands around $2,050–$3,725. Refinishing — strip and re-stain — prices a step higher (doors $75–$125, drawer fronts $35–$115, boxes $29–$41 a foot; the same kitchen refinished lands $2,350–$4,250) and has its own calculator entry below. Painting is the right call when the layout works and the boxes are solid — it is not a fix for failing cabinets.
Cabinet Refinishing
Strip and re-stain, priced by the piece: doors $75–$125 each, drawer fronts $35–$115, and the boxes and frames $29–$41 a foot. The typical 20-door kitchen lands $2,350–$4,250 — inside HomeGuide's published refinishing range of $1,500–$4,500. Refinishing keeps the wood and changes the tone; it is the right call on cherry, walnut, and oak that should never be painted over.
What Moves the Price
- Linear feet — everything scales with the run. Measure along the wall; uppers and lowers on the same wall count once, an island counts foot for foot.
- The tier — stock is the floor of the range, semi-custom is the middle most Sioux Falls kitchens land in, and custom is built to the room at the top.
- Wood and finish — oak runs about 5% under the maple baseline, cherry about 15% over, walnut about 30% over. Ceiling-height or stacked cabinets add about 10%.
- What stays — refacing and painting keep your boxes, which is most of the savings. The moment boxes or layout change, you are pricing new cabinets.
- The Sioux Falls-area factor — the dry-winter, humid-summer swing is hard on cheap finishes. A finish that fails in three years costs more than the one that lasts, and our written estimate names the finish so you can compare honestly.
Ranges are the published numbers we bid from: Angi's national cabinet data (installation $100–$1,200 per linear foot by tier; average project $6,191; refacing by material), HomeGuide's cabinet guides (per-box and per-foot bands, vanity totals, painting per-door pricing), and Fixr's national averages — trimmed about 5% for the Sioux Falls market, the same method our fleet's cabinet rate card documents.
A note on materials. These ranges are figured on semi-custom cabinets in maple, the middle of the market. Wood moves the number: oak runs a little under maple, cherry and walnut run over it, and painted finishes price by the work, not the species. Particleboard boxes with a custom face are not custom cabinets — when you compare quotes, ask what the box is made of. We confirm the exact wood, box construction, and finish at the in-person estimate, in writing, before any work starts.